Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. immobiliser for the CAN bus. It's discrete, doesn't employ LED indications or key fobs and is concealed in the vehicle's wiring.
The user can also disable the system temporarily by using Transport Mode when renting out their vehicle. This guide will take you through the process of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle from key cloning, hacking and relay attacks. The system is directly connected to the ECU of your vehicle and protected by a pin code you set. It is inaccessible to thieves using diagnostic scanners and other modern methods. ghost autowatch immobiliser isn't able to be disabled with circuit cuts.
The system is easy to use, however it's important to have professional installation to ensure a secure and secure connection to your vehicle's ECU. An approved installer from Thatcham can assist in the installation and programming of your Ghost system. They can also recommend an alarm or tracking system to complete the protection package for your vehicle.
To avoid an accidental deployment of airbags or short circuits To avoid an accidental deployment of airbags or short circuits, the installer must remove your battery. After this is completed the installer is now able to begin work. Basic hand tools can be used for precise connections. A multimeter is useful to verify electrical values. Cable ties and insulation tape are also vital for protecting connections and keeping wiring tidy. In addition, the user's manual offers specific instructions specifically tailored to the Ghost Immobiliser model you have.
It is crucial to select a grounding location that is free of any paint or debris during installation. The installer should also make sure the immobiliser's H and CAN L wires are connected to the appropriate ports on your vehicle's ECU. The wires can be connected or soldered depending on the model. To ensure a reliable and long-lasting connection, it is recommended that you choose a high-quality plug.
Once the install is complete After the installation is complete, the customer can turn on Transport Mode. This allows valet parking or mechanics to use the vehicle without knowing the pin code. To accomplish this, the user must press the button for service on the dashboard 5 times in a matter of 2 seconds. After that the system will confirm with 5 signal indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA verified and Thatcham approved. It's a great option for those who rent out their vehicles often on platforms such as Turo. Immobilisers can also lower insurance costs, as it reduces the likelihood of theft.
Getting Started
You won't have a problem with an autowatch immobiliser for those who want to safeguard your car from theft. The device prevents your vehicle from starting if someone steals or copies your key. This is due to its high-tech technology that is designed to stop the engine from running until the correct PIN code is entered.
The device connects to the vehicle's CAN bus network and allowing it to communicate with the ECU directly. It uses existing buttons on the dashboard and steering wheel to create a unique sequence only you can identify which makes it impossible for anyone else to start your car. This is the most secure security system to protect your pride and joy, keeping its value intact when you want to sell it in the future.
Installing a ghost ignition is a simple process, but it is crucial to follow the directions carefully to avoid issues with electricity and system malfunctions. First, you need to locate and determine a constant 12V power source as well as an adequate grounding point on the vehicle's chassis. Then, you can begin connecting the wires for the immobiliser. Make sure you use top-quality connectors and soldering methods to ensure a strong connection. Also, make sure to insulate the connections with heat shrink tubing and insulation tape to shield them from electrical short circuits and other issues.
Once the wires have been connected, you can connect the battery and begin the engine to check whether the immobiliser is functioning. After you've verified that everything is working correctly, you can install the immobiliser in a safe position inside the vehicle. Make sure to cover it well to ensure that thieves cannot get it into a compromising position.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified This means it is in compliance with the highest standards of security and is a fantastic protection against car thieves. It provides superior protection against key cloning, hacking, and relay attacks. It isn't able to be disabled unless you know the code. It is also simple to use and can be put into an auto valet mode so that your car will not be activated when you take it in for service or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system that's designed to stop theft of vehicles. It connects directly to your car's CAN bus network and communicates with the ECU and ECU, making it virtually undetectable to your vehicle. Unlike other aftermarket systems that require the removal of circuit components, the Ghost Immobiliser doesn't interfere with any of the factory settings for your vehicle.
The system is also unnoticeable by thieves using diagnostic scanners. This is because the system doesn't transmit and receive radio frequency signals and it utilizes CAN data to communicate with your ECU. Furthermore, it doesn't require any modification to your car's existing key fobs.
To make use of the Ghost Immobiliser simply turn on your car's ignition and enter your sequence for disarming (either one or two buttons). The indicator will flash two times to confirm that you have entered the correct code. After this, you can start your vehicle and leave safely.
Once installed, the Ghost Immobiliser will protect your car from hacking and key cloning and will also protect the value of your car's pride and joy. In Transport Mode, you can temporarily disable the Ghost Immobiliser when you have to hand your car to service or valet park.
You'll require a continuous power source (12V) in addition to a grounding source to complete the installation of a Ghost immobiliser. Make sure both are well-insulated and can be touched. Cable ties are also recommended for bundling and securing the wires. This will reduce the possibility of theft by potential thieves. Be sure to verify the locations of these points to avoid committing a mistake and mark them with an adhesive or label. It's also a good idea to inspect every connection for signs of wear and tear. Make sure that all connections are in place and properly sealed. Finally, don't forget to test the Ghost Immobiliser after installation is completed. This will make sure that the unit is operating properly, and that all connections are safe and well-insulated. If you encounter any issues, be certain to fix them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that is integrated into your vehicle's ECU to prevent the engine from starting without authorization. Its cutting-edge technology safeguards your car against hacking, key cloning, and other typical tactics thieves employ to steal cars. The Ghost works in conjunction with existing alarm and tracking systems to provide the best security for your vehicle. The Ghost's unique features and secluded design make it a preferred choice for car enthusiasts and security-conscious motorists alike.
It is important to follow the steps of installation to ensure proper integration of Ghost Immobiliser. Consult the wiring diagram for the vehicle to help you locate and connect the wires. After that, you'll need identify the power source and grounding points. Once you've located them, you will be required to mark the points so that they are easy to locate during installation. It's important to use high-quality materials and tools. Basic hand tools will help you make precise connections. A multimeter can verify electrical values, and also ensure safety. Cable ties and insulation tape will help keep all connections tidy and neat. Finally, a user manual will provide specific guidance specifically tailored to your Ghost model.
It is essential to test the system before installing it. Enter the PIN code into the system and start the vehicle. This will ensure that the immobiliser functions in the way it was intended, preventing unauthorized vehicle starts. It's recommended to perform this procedure regularly as part of your regular vehicle inspections to ensure that the system is operating properly.
After the installation is completed, you can begin driving your car with confidence. The Ghost will guard your car from potential car thieves. It will ensure that no one can take your car away without having the correct PIN code. The Ghost can also be used with a Thatcham-approved tracker to identify any attempts to steal or tamper, allowing you to locate your vehicle if it's stolen.
The Ghost is compatible with a wide variety of automobiles, including those from most major manufacturers. Monty's Locksmith can help you secure your vehicle using this cutting-edge device. Contact us today to find out more about our services and installation options. We are a TASSA registered installer, which assures us that we follow strict guidelines for installing our products. This reassures customers, insurers and law enforcement agencies that all installations are completed safely and in a correct manner.